BlogBusinessNews

how to jump start vw tiguan 2018

Jump-starting a VW Tiguan 2018 is similar to jump-starting any other vehicle. Here’s how to do it safely:

Materials You’ll Need:

  1. Jumper cables.
  2. Another vehicle with a working battery (known as the booster vehicle).

Step-by-Step Guide:

1. Position the Vehicles:

  • Park both vehicles close enough so that the jumper cables can reach both batteries but without the vehicles touching each other. Make sure both cars are in “Park” or “Neutral” (for manual transmissions) and the ignition is turned off.

2. Locate the Battery Terminals:

  • Identify the battery terminals in both vehicles. In most cars, the battery is located under the hood.
  • The battery has two terminals: one positive (+) and one negative (-). They are usually marked with a plus sign for positive and a minus sign for negative.

3. Attach the Jumper Cables:

  • Take the red (positive) jumper cable and attach one end to the positive terminal of the dead battery (in the VW Tiguan).
  • Attach the other end of the red jumper cable to the positive terminal of the booster vehicle’s battery.
  • Take the black (negative) jumper cable and attach one end to the negative terminal of the booster vehicle’s battery.
  • Instead of attaching the other end of the black jumper cable to the VW Tiguan’s battery, connect it to a bare metal, unpainted part of the vehicle’s frame or engine. This serves as a ground and minimizes the risk of sparks near the battery.

4. Start the Booster Vehicle:

  • Start the booster vehicle and let it run for a few minutes. This allows the dead battery in the VW Tiguan to receive some charge.

5. Attempt to Start the VW Tiguan:

  • After a few minutes, try to start the VW Tiguan. If it starts, great! If not, wait a bit longer or check the cable connections.

6. Disconnect the Jumper Cables:

  • Once the VW Tiguan starts, carefully disconnect the jumper cables in the reverse order you connected them:
    • Remove the black (negative) cable from the grounded metal part of the VW Tiguan.
    • Remove the other end of the black cable from the negative terminal of the booster vehicle’s battery.
    • Remove the red (positive) cable from the positive terminal of the booster vehicle’s battery.
    • Remove the other end of the red cable from the positive terminal of the VW Tiguan’s battery.

7. Drive the VW Tiguan:

  • After jump-starting, it’s a good practice to drive the VW Tiguan for at least 20-30 minutes to help recharge the battery.

Important Tips:

  • Ensure that the jumper cables do not touch each other during the process to avoid sparks.
  • If the VW Tiguan doesn’t start after several attempts, the battery may be completely dead or faulty, and it might need to be replaced.
  • If jump-starting doesn’t work, it’s a good idea to have the vehicle’s electrical system and battery checked by a professional mechanic.

Always prioritize safety when jump-starting a vehicle.

Also Read:
https://ideanitro.com/how-to-keep-deep-wave-hair-looking-wet/
https://ideanitro.com/how-to-keep-deer-blind-windows-from-fogging/
https://ideanitro.com/how-to-keep-dust-down-in-a-dirt-floor-barn/

Leave a Reply

Back to top button