how to install toilet paper holder without screws

You can install a toilet paper holder without screws using adhesive mounting tape or glue designed for this purpose. Here’s a step-by-step guide on how to do it:

Materials You’ll Need:

  1. Toilet paper holder
  2. Adhesive mounting tape or adhesive glue (designed for bathroom fixtures)
  3. Spirit level
  4. Pencil
  5. Rubbing alcohol or adhesive remover (optional)
  6. Safety glasses (recommended)

Step-by-Step Guide:

1. Choose the Location:

  • Decide where you want to install the toilet paper holder. Typically, it’s installed within easy reach of the toilet, but make sure it’s at a comfortable height and reachable from a seated position.

2. Clean the Surface:

  • Clean the wall where you plan to attach the toilet paper holder using rubbing alcohol or adhesive remover to remove any dirt, grease, or residues. This will help the adhesive bond better.

3. Mark the Position:

  • Use a spirit level to ensure that the holder will be installed straight. Mark the desired location with a pencil.

4. Apply Adhesive Tape or Glue:

  • Depending on the product you’re using, apply adhesive mounting tape or adhesive glue to the back of the toilet paper holder according to the manufacturer’s instructions.

5. Press the Holder into Place:

  • Carefully press the toilet paper holder onto the wall in the marked position, ensuring it’s level and properly aligned. Apply firm pressure to ensure a strong bond between the holder and the wall.

6. Allow It to Set:

  • Follow the manufacturer’s recommended curing time for the adhesive. This can vary depending on the specific product you’re using but typically ranges from a few hours to 24 hours.

7. Test the Holder:

  • Once the adhesive has fully cured, gently test the toilet paper holder to ensure it’s securely attached to the wall. Pull and release the holder to simulate the action of using it to ensure it can hold the weight of a toilet paper roll.

8. Place Toilet Paper Roll:

  • Insert a toilet paper roll onto the holder, and you’re ready to use it.

Installing a toilet paper holder without screws using adhesive tape or glue is a convenient and non-permanent solution. It’s important to follow the manufacturer’s instructions for the specific adhesive product you’re using to ensure a secure and long-lasting installation. Keep in mind that the holder may not be as robust as a screw-mounted one, so avoid putting excessive force on it.

Also Read:

Leave a Reply

Back to top button