Installing a skimmer extension collar is a relatively simple process that helps adjust the height of your pool’s skimmer to accommodate varying water levels. It’s a useful addition to your pool maintenance routine. Here’s a step-by-step guide on how to install a skimmer extension collar:
Materials You’ll Need:
- Skimmer extension collar
- Pool maintenance tools (skimmer net, pool brush, etc.)
- Screwdriver or drill with appropriate bit (if required)
- Silicone sealant (optional)
- Pool water level kit (to check water level)
- Safety glasses (recommended)
Step-by-Step Guide:
1. Prepare Your Pool:
- Ensure your pool is clean and free of debris. Remove any leaves, twigs, or other objects from the water surface using a skimmer net.
2. Check the Water Level:
- Use a pool water level kit to check the water level in your pool. Ideally, the water level should be at the midpoint of your pool skimmer’s opening or as recommended in your pool’s manual.
3. Choose the Right Location:
- Determine where you want to install the skimmer extension collar. It should be positioned at a height that aligns with your desired water level.
4. Turn Off Pool Equipment:
- Turn off any pool equipment, including the pool pump and filter, to ensure your safety during the installation process.
5. Remove the Skimmer Lid:
- Open the skimmer lid or cover to access the interior of the skimmer.
6. Install the Extension Collar:
- Place the skimmer extension collar inside the skimmer, aligning it with the skimmer opening. It should rest securely on the skimmer’s ledge.
7. Secure the Collar (if required):
- Depending on the design of the skimmer extension collar, you may need to secure it in place. Some collars have tabs or screw holes for this purpose. If screws are required, use a screwdriver or drill with the appropriate bit to attach the collar securely to the skimmer.
8. Apply Silicone Sealant (optional):
- To create a watertight seal and prevent water from bypassing the collar, you can apply a thin bead of silicone sealant around the outer edge of the collar. This is optional but can help improve the seal.
9. Check for Proper Fit:
- Ensure that the skimmer extension collar sits at the desired height and creates a snug fit with the skimmer opening.
10. Reassemble and Restart Equipment:
- Replace the skimmer lid or cover and make sure it’s securely fastened.
- Turn on your pool equipment, including the pump and filter.
11. Adjust Water Level:
- Monitor the water level in your pool. If it’s too high, you may need to use a submersible pump to lower it to the desired level.
12. Test the Skimmer:
- Test the skimmer’s functionality by observing how it captures debris from the pool’s surface. The skimmer extension collar should help maintain the desired water level.
Installing a skimmer extension collar can help improve the efficiency of your pool’s skimmer and maintain a consistent water level. Regularly check the collar for any signs of wear or damage and replace it if necessary to ensure it continues to function effectively.
Also Read:
https://ideanitro.com/how-to-make-hamburger-buns-from-frozen-bread-dough/
https://ideanitro.com/how-to-make-haste-3-potions-hypixel-skyblock/
https://ideanitro.com/how-to-make-gulp-juice/
